Lenze PC-based automation - Manual (Page 17)

DMS 1.3 EN - 02/2011
L
17
Control technology| System manual
System description
System components
Command Station
Command Station (CS) is a stand-alone operator station (IP65) which is totally protected
against dust and water spray incursion. The flat enclosure is fitted with a mounting frame
at the rear edge which is intended for support arm mounting or direct fixing to the wall. To
allow the flexible implementation of individual operator concepts, the system offers nu-
merous options and add-on operator consoles as for example:
– Touch screens,
– functional and alphanumeric keyboards,,
– Operator consoles with switching elements.
Features of the supported device series CS 5800 ... CS 9800
 Display
– Display size 15.0-19.0 inches
– Different front/keyboard variants
 Mounting
– Stand-alone, completely enclosed (IP65)
– Flexible support arm mounting
 Interfaces:
– Ethernet on-board
– Option: 2 x CAN (example: one Logic bus line and one Motion bus line)
– Option: EtherCAT
– Option: PROFIBUS