Lenze Global Drive Control (GDC) - Manual (Page 4)

Global Drive Control | L-force Controller as Gateway
About this documentation
4
L
1.1 EN - 10/2010
1 About this documentation
This documentation contains information on the parameter setting & configuration in the
Lenze »Global Drive Control« (»GDC«).
Target group
This documentation addresses to all persons who want to parameterise, configure, and
diagnose a controller by means of an L-force Controller and the »Global Drive Control«
Engineering software.
Validity information
This manual is valid for the Lenze »Global Drive Control« from:
version 4.12 onwards
Document history

Note!
This documentation supplements the mounting instructions and the associated
hardware manuals supplied with the controllers supported.
The mounting instructions for the respective drive components contain safety
instructions which must be observed!
Version Description
1.0 08/2008 TD11 First edition (control technology V2.1)
1.1 10/2010 TD11 Gateway function with EtherCAT supplemented (control technology V3.0)