Lenze Cam Designer Basic - Manual (Page 22)

Cam Designer Basic
Operation
Create a new project
22 2.1 EN - 09/2005
L
6.1 Create a new project
After starting the »Cam Designer Basic« the user interface is displayed with the master axis
and a slave axis. You can either continue to process the project or call a new project.

How to create a new project...
Go to the symbol bar of the »Cam Designer Basic« and click the symbol or select
FileNew to start a new project:
Detailed information about the individual steps can be found in the following subsections.
6.1.1 Step 1: Defining the features of the master axes
The entries in the axes reflect the machine constants. Therefore, only work with real val-
ues.
 The master axis can be a real or virtual axis.
The master axis has the features of an electrical shaft.

Note!
If you only use a virtual master, then enter in the group field Machine under
Gearbox factor in the input field z2 100 and in z1 1. This serves to achieve a high-
er resolution of the master angle.