Lightforce LED 215 - Manual (Page 3)

LIGHTFORCE AUSTRALIA PTY LTD • 28 Orsmond Street, Hindmarsh SA 5007 Australia • www.lightforce.com | email: [email protected]
Australia: Tel: 08 8440 0888 | Fax: 08 8346 0504 • Int’l: Tel: +618 8440 0888 | Fax: +618 8346 0504
All logos and images are subject to relevant trademark and copyright protection LIGHTFORCE Pty Ltd | © July 2014 • Data and specifications contained maybe subject to change without notice.
LIGHTFORCE Australia Pty Ltd shall not be liable for damage, malfunction, failure resulting from accident, misuse, misapplication, unauthorised repair, neglect, modification, unauthorised or non standard replacement parts,
accessories, bulbs, batteries or voltage or operation of the product beyond its technical and or environmental specification.
Once all the electrical connections have been made, align the light to the desired position and then tighten all bolts as per
recommended torque specifications (see specifications section).
CAUTION
Improper installation of the connector will affect the reliability and operation of your lights.
Do not remove waterproof connector from the driving light cable; this will lead to water ingress and void warranty.
TECHNICAL SPECIFICATIONS:
• Power: 108 W (36 x 3w European chipsets)
• Raw Lumens: 7794
• Input voltage range: 10-36V DC
• Current draw: 8.7A @ 13.2v
• Colour temperature: 5000K
• LED Lifespan: Up to 50,000 hours
• Input cable length: 450mm (17.72”)
• Operating temperature -40°C to 63°C (-40°F to 145°F)
• Dimensions 215mm (W) x 196mm (H) x 97mm (D)
8.46“(W) x 7.71” (H) x 3.82” (D)
• Weight including bracket 3.3kg (7.3lb)
RECOMMENDED WIRE SIZE
2.0mm2 (14AWG) Minimum
MOUNTING FASTENER TORQUE SPECIFICATIONS
M10 x 30mm bottom mount bolt - 35Nm (26lb-ft)
M8 x Torx bolt - 20Nm (15lb-ft)
WARRANTY
Australia
“Lightforce” means Lightforce Australia Pty Ltd ABN 54 069 439 774 Address: 28 Orsmond Street, Hindmarsh, SA, 5007.
Telephone:+61 8 8440 0888. Email Address: [email protected]
“Lightforce Affiliates” means Lightforce, Lightforce’s related bodies corporate (within the meaning of the Corporations Act 2001),
and their respective employees, officers, agents and contractors.
“Warranty Period” means:
(a)
For Lightforce products (excluding bulbs and batteries, Custom Built products and mounts and Ace Precision Rifle Systems
products) manufactured in Australia and sold either in Australia or overseas, three (3) years from the date of purchase specified
on your sales receipt or invoice unless otherwise notified by Lightforce in writing prior to or at the date of purchase;
(b)
For
1) Lightforce products and accessories manufactured outside, but imported into, Australia; and
2) Custom Built products and mounts (wherever manufactured);
3) sold in Australia or overseas (but in each case excluding bulbs and batteries, and Ace Precision Rifle Systems products), one
(1) year from the date of purchase specified on your sales receipt or invoice unless otherwise notified by Lightforce in writing prior
to or at the date of purchase.
What this warranty covers:
Lightforce warrants that it will, at its option, replace or repair each product that you purchase which, during the Warranty Period,
has a defect in materials or workmanship under normal use and conditions.
Statutory rights:
Our products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have
the products repaired or replaced if the products fail to be of acceptable quality and the failure does not amount to a major failure.
In addition, the benefits given by this warranty are in addition to your rights and remedies under a law in relation to the products.
LED215.indd 3 31/07/2014 3:56:59 PM