Longevity FORCECUT 42i - Manual (Page 20)

ForceCut 42i 110v/220v PFC 40amp Plasma Cutter
20
Routine Maintenance
The life of your machine and the quality of the work performed using your machine, will be
enhanced by practicing periodic routine maintenance.
• At regular intervals, clear dust that may accumulate in the machine using clean and dry
compressed air. If the working condition has heavy smoke and pollution, the welding machine
should be cleaned once a month.
• Keep the machine exterior clean with mild soap and water.
• Do not walk on or store items on the cables or cords.
• Do not jar, drop, or stack items on top of the machine.
• Always connect the machine to a well-grounded electrical outlet.
• Always check the torch consumables before and after use and ensure that they are clear of
obstructions, and that no parts are damaged.
• Replace any worn or damaged consumables before using machine.
• For periods of prolonged non-use, remove cables and store them in their original boxes in a
cool dry place.