Love The Drive BMW Windstop 3 series (E36) 318, 323, 325, 328, 1993 to 1999 User Manual

Page 2

Advertising
background image

Align the black hooks, at the rear of the wind

deflector so that they hook onto the quarter

trim panel, the area covered by the top lid.

Making sure that both of the black hooks are

attached to the trim panel, close the top cover

lid to hold the black hooks in place.

Pull the wire bracket back and lower it to line

up with the hole in the trim panel.

The wire hook once pulled out will rest on

the trim panel.

If you have any questions or comments please

call 1-855-457-5683 or email [email protected]

www.lovethedrive.com

From one side of your car, lower the wind deflector into the back seat area of your convertible.

Release the wire bracket so it enters the hole. Now repeat on the other side and

you are now ready to Love The Drive!

Advertising