Love The Drive BMW Windstop 1 Series (E88) 128i, 135i 2007 to 2013 - Manual (Page 2)

Lower the wind deflector into the backseat
area and insert the front bolt into the hole
and then the rear bolt.
Now lower your end into the back seat area so
the front barrel bolt is in line with the front
hole. Slide the bolt forward into the hole and
turn the handle down to lock the bolt.
Next reach back and slide the back bolt into
the rear hole and turn the handle down to
lock the barrel bolt.
When not in use your wind deflector willl
store in the trunk. When storing your wind
deflector please use the storage bag that is
included.
You can now raise the top panel of the wind
deflector and you are ready to Love The Drive.
When you are finished please double check to
that all four handles are turned downwards so
the barrel bolts are in the locked position.