Love The Drive Mustang Wind Deflector 2005 to 2014 User Manual
Page 3
Step 5:
Now attach the two black snap
hooks to the baby seat anchors. There are
four of these anchors in the back seat.
Attach the two snap hooks to the middle
anchors by the seat belt buckles.
Step 5 Cont:
The black snap hooks are
inserted with the snap facing down. Slide the
hook into the hole, press down and then pull
back towards you to attach it to the anchor.
Step 6 Cont:
Next attach the four straps. The
two black snap hook straps attach near the back
brackets and the two silver hook straps attach to
the buckle under the front brackets.
Step 6:
The
front silver hook
straps attach to
the bottom of
the trim panel
below the back
seats. Attach
the silver hooks
on both sides.
Step 4 Cont:
The rear brackets may
need to be adjusted so they fit tight
against the trim panel. The adjustment is
made by adjusting the two screws
underneath the wind defelctor.