Mag Layers USA RT12P14 - Manual (Page 5)

Reflow Soldering
Natural
cooling
260°C
Time(s)
Te
m
pe
ra
tu
re
(°C
)
●
IR Reflow soldering :
Preheat at 3 ℃ per second to 160 ℃ and using lead free solder ,
IR at 260 ℃ for 10 seconds.
● Rework flow:
Component must withstand two IR reflow cycles with a cool down
between cycles
● Temperature is measured at the terminal portion of product
(Using thermocoupler for measurement).
● This profile is reference data we recommend. Please check in your
actual process.
● For reliable soldering, the thickness of solder paste screen should
be over the terminal co-planality.
● The cutted end of terminal has no plating
(out of subject of solder ability).
160°C
53sec TYP.
3°C /sec MAX.
Pre-heating
60sec MIN.
120sec MAX.
2.5°C /sec MAX.
-3°C /sec MAX.
So
ld
er
in
g