Mark Feldstein & Associates Roll-Up Piano - Manual (Page 5)

Instructions on Product Functions:
Put the Roll Up Piano on a flat surface and set it on automatic play. Button interface area
on the right side is the main area which shall be used to select tones, rhythms, function
settings, demonstrative songs, recording, and powering the unit on and off. The Red
Digital Display area provides the status of tones/combinations/rhythms/demo songs. The
Keyboard area on the left side is the same as an ordinary piano and can be played
normally.
*Selection for Types of Tones and Rhythms:
The number in the Digital Display area shows the status of the types of presetting tones
or rhythms currently selected. Press the (FUNC’N) keys to select from 100 types of
tones and rhythms.
There are 100 tones available in the presetting mode. To switch to Tone Selection Mode:
1. Turn on the power by pressing the Power button. The LCD screen indicates
“0.0”.
2. Press (FUNC’N) keys either up or down to select desired tone. When pressing
up, the LCD screen indicates “9.9”. When pressing down, the LCD screen
indicates “0.1”.
Page 3