Bissell BS-7920F - Manual (Page 5)

Prepared by Monique Lania 5Care & Maintenance of Bissell Deep Cleaner
Cleaning of front window nozzle
Cleaning underneath the front window nozzle
Fill the Tank-in-Tank with clean tap water and fill the SmartMix Bottle with hot (not boiling) tap water.
Switch grey SmartMix Switch located next to solution SmatMix bottle to
‘Normal’ and switch diverter knob to ‘Carpet Cleaning’ setting
Empty collection tank and SmartMix bottle at the end of the procedure.
Use the machine on hard surface such as concrete to suck up a quantity of clean
water. This will remove any solution build-up.
For any difficult to remove debris that is trapped in the front window nozzle after flushing the
machine, it is advisable to use a thin piece of flexible plastic to dislodge the debris.
Wipe underneath surface with a soft cloth
Ensure after each use that hair and debris are removed from the brush roller using your fingertips
or a pair of scissors, paying particular attention to the leaver arms. This will prolong the life of the
brush belt.