Mayline TB30 Work Table & SLF30 Shelf - Manual (Page 3)

6. After deciding on table height (must be the same as adjacent TB60 Work Table), line up the
threaded holes in each leg with the proper holes in the leg sleeve; use two socket-head screws to
assemble each leg in place (allen wrench provided)
7. Once both legs have been assembled in place, carefully set table upright adjacent to TB60 Work
Table and connect front and back support rails to the TB60 Work Table. Use the four painted
machine screws and kepsnuts now holding one side of the TB60's front support rail and back panel
in place.
8. Each leg has an adjustable glide. If the table needs to be leveled, turn the glide as needed to
shorten or lengthen either leg.
Table Height Max. 36"
Table Height Min. 29"
Table Height
Adjustment
Range 29" to 36" in
One Inch Increments