Mayline SRF3837 - Manual (Page 3)

5. Install corrugated inside header panel under
top of sorter with larger corner cutouts toward
back of unit. Then, install the corrugated inside
header panels with feet on bottom and large
corner cutout to top rear of sorter. Press inside
end panels firmly against outside end panels.
6. Install one corrugated shelf into the slots in the
inside end panels, with the short folded side of
the shelf on the bottom. Repeat with the
remaining shelves, ending with the last shelf
resting on bottom of sorter.
7. Place a corrugated insert ( with notch at the
bottom front) into a corrugated divider. Fold small
flaps at bottom of divider outwards. Now install
corrugated divider, making sure the folded flaps
fit under bottom shelf, and top of divider fits into
slots in headed panel. finally, press divider down
firmly until flush with shelves. Repeat with
remaining five dividers and inserts.