Mayline RGE - Manual (Page 7)

7
Mounting Guidelines
3.1 Assembly Instruction
Assemble the frame according to the assembly instructions (page 8)
Motor Cable
Handset Unit
Make sure to ask your desk vendor for an approved combination of desktop and frame.
Always check desktop thickness against the length of the mounting screws before mounting the desktop to
ensure they are appropriate and not long enough to protrude through the top surface once screwed in.
Connect the two motor cables and the cable from the power supply to the handset unit. Take care to route
all cables so that they cannot be damaged by normal operation. Please refer to the assembly instructions
for this and use the supplied cable routing materials to secure the cables.
Connect the power cable to a power outlet and make sure that the cable is not in danger of being
squeezed, nicked, twisted or otherwise damaged.
The table is now ready to use. The motors will switch off automatically when the frame reaches its
maximum or minimum elevations.