Mayline Mobile Lite User Manual
Page 6
STEP 9.
Once first track (the Anti-Tip track) is secure,
the remaining tracks may be set into place.
Use carriages as a guide for track placement.
Measure to ensure tracks are truly parallel and
square.
Note: Wheel channel closest to the anti-tip
tab is a non-floating wheel channel.
STEP 10.
Slide one carriage on the track to determine
spacing. Verify carriage wheels are centered
in the channels and in the track.
STEP 11.
The tracks must be parallel and square to each
other to ensure proper operation. Measure
each set of tracks and the entire system,
corner to corner, to verify that each distance is
the same.
(6)
Anti-Tip Track
Spacing From
Wall 1
1
2
"
STEP 12.
Install all end stops nearest the stationary shelving
and install the balance of the carriages. Shelving
end only.
STEP 13.
Install remaining track anchors.
STEP 14.
Slide the remaining carriages on the track, verify
smooth operation. Install the remaining end stops
Track placed touching
stationary shelving
Track placed touching
stationary shelving
Track
Anti−Tip Track
Track
Track
Spacing From
Wall 1
1
2
"
Anti-Tip Track location
in 2 Track Layout
Anti-Tip Track location in
3 or more Track Layout