Mayline Four Post Shelving - Manual (Page 10)

BRACKET ASM.
36" RH
BRACKET
STOP (6)
BRACKET
STOP (6)
1/4-20 X
1
2
" SCREW (8)
BRACKET ASM.
18" / 36" RH
1/4-20 X
1
2
" SCREW (8)
NOTE:
L.H. Brackets have
SQUARE holes.
R.H. Brackets have
ROUND holes
I NSTALLATION OF BRACKETS FOR ROLLOUT DRAWERS.
For proper spacing and installation of drawers, brackets should be installed
from the bottom up. The location of the bottom drawer and remaining brackets
will be different depending on the height of the drawer being installed. Each
bracket has two tabs on each end of each bracket assembly that get installed
into corresponding open slots on the four post upright.
BOTTOM DRAWER BRACKET INSTALLATION :
10.5" drawer (use 3rd & 4th slots above lower spreader)
6" drawer (use 2nd & 3rd slots above lower spreader)
4.5" drawer (use 1st & 2nd slots above lower spreader)
REMAINING DRAWER BRACKET INSTALLATION:
10.5" drawer (use 3rd & 4th slots above drawer front)
6" drawer (use 2nd & 3rd slots above drawer front)
4.5" drawer (use 1st & 2nd slots above drawer front)
36" Bracket / Slide Installation
FR
ON
T