Mayline Storage/Evidence Cabinet Shelf - Manual

Storage/Evidence Cabinet Shelf
Components:
Shelf
Shelf Clips (6 required per shelf)- (2) 911196R (Kit of 4)
* No Tools Required *
1. Remove packaging material. NOTE: Check for concealed damage. Report damage to carrier.
2. Remove the shelf clips from the plastic bag that are shipped with the shelves.
3. Place 3 shelf clips on each LH & RH internal vertical panels at the desired shelf height. Insert
clips with small flat end tips upwards - See Drawing A.
4. Make sure the cabinet doors are fully open.
While facing the cabinet, hold the Shelf right side
up (the front and back of the Shelf are
interchangeable). See Drawing A. Tip one end
of the Shelf higher than the other end to clear the
doors.
5. Move the Shelf inside the cabinet above the
shelf clips until the back of the Shelf gently
touches the back of the cabinet.
6. Level the Shelf, then ease it down onto the
Shelf clips. If the Shelf seems loose, check to
make sure that the six shelf clips are level and
that the Shelf end flange notches are properly
engaged.
Drawing A
End view - Shelf