Meade Instruments ETX-LS Software Update Instructions - Manual (Page 6)

ASU SOFTWARE UPDATE INSTRUCTIONS - LS TELESCOPE
www.meade.com Page 6 of 20 Rev. 26-Oct-2009
1.1.14. The copying and validating of large files to the telescope
will take less than an hour.
1.1.15.
The update is completed successfully. Press “OK” to
continue.
1.1.16. The LS telescope handbox will display:
“Update Complete
Cycle Power”.
1.1.17. Turn the LS telescope power off and on; the new version
will be displayed on the handbox startup screen.
1.1.18. Enjoy your updated LS telescope!
1.2. U
PDATE
LS
VIA MINI
SD C
ARD
1.2.1. A mini SD Card can be used to update the LS telescope
without a nearby PC and USB connection.
1.2.2. Run Autostar Updater (ASU) from the PC desktop
shortcut or the
Start > All Programs > Meade > Autostar Updater menu.