Introduction, 1 description, 2 system requirements – Memmert CELSIUS 10.0 User Manual
Page 6
6
CELSIUS 10.0
1. Introduction
1.1
Description
CELSIUS is a computer programme for the programming, control and logging of MEMMERT
ovens with an RS-232, or alternatively RS-485, USB or Ethernet interface.
With CELSIUS, you can
►
Create, change and save tempering profiles on your computer in graphical or tabular
form.
►
Control one or more MEMMERT ovens via one or more serial interfaces and log the current
values. up to eight ovens can be controlled via RS-232 or USB, and if RS-485 or Ethernet
interfaces are used (not for ovens of the E class), you can control up to 16 ovens simulta-
neously;
►
if your oven is equipped accordingly, you can use the functions of the MEMoryCard XL,
i. e. to store a tempering profile on a MEMoryCard XL, as well as load tempering profiles
and protocols from a MEMoryCard XL, display this on the monitor and save it to a differ-
ent data medium (hard drive, USB stick);
►
read out, manage and document the internal ring protocol memory (1024 kB) of the
MEMMERT ovens;
►
print out tempering profiles and accompanying protocol data (depending on the oven
type, temperature, humidity, vacuum, CO
2
, O
2
, fan speed, air flap position and switch
contacts, see page 7 ) including GLP data, graphically or numerically.
1.2 System
Requirements
Category
Minimum system reqirements
Processor
Pentium 1 GHz
Main memory
1 GB
Available free space on hard
drive
1 GB
CD-ROM drive
yes
Graphics
VGA graphics and colour monitor
Interfaces
an unused RS-232 or USB interface, if several ovens are being
operated, one interface for each oven
Operating system
Windows XP, Vista, 7