Memmert ICP Compressor-cooled incubators - Manual (Page 13)

D30374 | Date 10/2014 13
Construction and description
2.8 Applied guidelines and standards
►
Directive 2004/108/EC with amendments (directive of the council on the approximation
of the laws of the member states relating to electromagnetic compatibility). Standards
complied with:
DIN EN 61326:2004-05, EN 61326:1997, EN 61326/A1:1998, EN 61326/A2:2001
EN 61326/A2:2003
►
Directive 2006/42/EC (directive of the European Parliament and of the Council of 17 May
2006 on machinery, and amending Directive 95/16/EG (revision). Standards complied with:
DIN EN ISO 12100-1:2003, DIN EN ISO 12100-2:2003
EN ISO 14121-1:2007, EN ISO 14121-2:2007
2.9 Declaration of conformity
You can download the EC declaration of conformity of the appliance online:
English: http://www.memmert.com/en/service/downloads/ce-statement/
German: http://www.memmert.com/de/service/downloads/eg-konformitaetserklaerung/
2.10 Ambient conditions
►
The appliance may only be used in enclosed areas and at the following ambient condi-
tions:
Ambient temperature
15 °C to 28 °C (up to 34 °C with limited tempera-
ture range)
Humidity rh max. 70 %, non-condensing
Overvoltage category II
Pollution degree 2
Altitude of installation max. 2,000 m above sea level
►
The appliance may not be used in areas where there is a risk of explosion. The ambient air
must not contain any explosive dusts, gases, vapours or gas-air mixtures. The appliance is
not explosion-proof.
►
Heavy dust production or aggressive vapours in the vicinity of the appliance could lead to
sedimentation in the interior and, as a consequence, could result in short circuits or dam-
age to electrical parts. For this reason, sufficient measures to prevent large clouds of dust
or aggressive vapours from developing should be taken.
2.11 Scope of delivery
►
Power cable
►
Sliding grid (load capacity 30 kg each)
►
USB storage medium with software and AtmoCONTROL manual
►
the operating instructions at hand
►
Calibration certificate
►
Separately packaged fastening material for wall mounting (see page 17)