Memmert INCO 246/246 med CO2 Incubators (Generation 2003) - Manual (Page 35)

35
Operation and control
5.10.4 Settings example week time switch
From Mo-Fr (workdays group), the appliance should switch on at 9.30 and switch off at
19.00. In addition it should work on Saturday from 10.00 to 14.00 ( Fig. 21 ).
Mo Sa Fr Th We Tu Su
9:30h - 19:00h
24:00h
12:00h
01:00h
9:30h - 19:00h 9:30h - 19:00h 9:30h - 19:00h 9:30h - 19:00h
10:0h - 14:00h
Fig. 21 Operation with week time switch (example)
1. Setting the week time switch operating mode
Hold the SET key down for approx. 3 seconds, the current
operating mode then begins to flash. Select the week
time switch operating mode with the push-turn control,
while the SET key is held down.
Release the SET key, the control is now in the week time
switch operating mode.
PRINT SETUP
2. Switch on Mo-Fr at 09:30
Turning the push-turn control to the left, select the
"Mo-Fr on" icons (group working days).
Hold down the SET key and set the desired switch-on
time with the push-turn switch to 9:30.
on
off
Mo Tu We Th Fr Sa Su
3. Switch off Mo-Fr at 19:00
Select "Mo-Fr off" (group working days) with the push-
turn control.
Hold down the SET key and set the desired switch-off
time with the push-turn switch to 19:00.
on
off
Mo Tu We Th Fr Sa Su