MotorGuide Xi5 Wireless Trolling Motor - Manual (Page 32)

Section 5 - Maintenance and Storage
Page 28 90-8M0082949
eng
JULY 2013
IMPORTANT: Remove the propeller nut with a wrench or a ratchet and socket. Using another tool may damage the
propeller nut or shaft. If the propeller cannot be removed easily, use a rubber mallet to lightly tap the back side of the
opposite blade. If the propeller cannot be removed, have the propeller removed by an authorized dealer.
NOTE: If the propeller pin is bent, replace the propeller pin.
53442 44663
Installing the Propeller
1. Rotate the motor shaft to insert the propeller pin horizontally.
a - Propeller pin
2. Install the propeller onto the motor shaft by engaging the propeller onto the propeller pin.
44663
3. Install the washer (or anode, for saltwater models) onto the propeller shaft then install the propeller nut. Tighten the
propeller nut securely.
53442
4. Tighten the propeller nut another ¼ turn.
a
44664