MTS FlexTest Models 200 - Manual (Page 101)

FlexTest 60 Controller Configuration
MTS FlexTest® Models 40/60/100/200 Controller Hardware FlexTest Controller Configurations 101
FlexTest 60 Controller Configuration
About the FlexTest 60 Controller
The MTS FlexTest 60 Digital Controller is a fully digital proportional, integral,
derivative, feed forward (PIDF) servocontroller that provides complete control of
up to six stations in a test system.
A FlexTest 60 Controller consists of:
• One Model 494.06 Chassis that contains controller hardware.
• A computer workstation that runs MTS controller applications.
For a detailed listing of configuration options, see the FlexTest 60 Configuration
engineering drawing (Part number 700-003-811).
Controller capabilities
* Six-station configurations only support On/Off HSMs.
FlexTest 60
Digital Controller R
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
LAN 2
LAN 1
DEBUG
MOTOROLA
10/100 BASE T
10/100 BASE T
SCSI BUSY
PIB BUSY PCI MEZZANINE CARD
PCI MEZZANINE CARD
Over Temp Power OK
P ARAMETER F LEX T EST 60
Test Stations Up to 6*
Control Channels Up to 8
Conditioned Transducer Inputs Up to 24
Auxiliary Data Inputs Up to 32
VME Bus Slots 6
Transition Bus Slots 7 (powered), 1 (unpowered)