MTS FlexTest Models 200 - Manual (Page 179)

Model 494.46 8-Output D/A Card
MTS FlexTest® Models 40/60/100/200 Controller Hardware Mezzanine Cards 179
Model 494.46 8-Output D/A Card
About the Model 494.46 8-Output D/A Card
The Model 494.46 8-Output D/A Card is a mezzanine card that you can plug
into one of the slots on the Model 494.40 I/O Carrier board. Each D/A
converter card provides up to eight analog output signals.
Analog output signals are typically routed from the D/A card to a Model
494.76 8-Output BNC transition board. The transition board connects to the
front-panel connectors on the I/O carrier board that contains the D/A card.
The BNC board includes a BNC connector for each D/A output.
You can also use the Model 494.46 card to drive a Model 494.79 8-Channel
Valve Driver transition board. In this application, cables route the D/A
output signals from the I/O carrier board to the valve driver transition board.
Specifications–Model 494.46 8-Output D/A Card
P ARAMETER S PECIFICATION
Outputs Each Model 494.46 D/A card provides eight (8)
single-ended, analog-output signals.
Resolution 16 bits
Output Drive ± 10 V DC minimum at 5 mA
Output Accuracy
0.10% of reading + 0.001 VDC *
*. The D/A accuracy specification includes the effects of zero offset,
linearity, and resolution.