MTS FlexTest Models 200 - Manual (Page 204)

MTS FlexTest® Models 40/60/100/200 Controller Hardware
Model 494.49 Quad Encoder Interface Card
Mezzanine Cards 204
Temposonics G Connections for the Model 494.49 Quad Encoder Card
The Model 493.80 transition board converts the differential signals from the
Temposonics G transducers into single-ended signals that are compatible
with the Model 494.49 Quad Encoder Interface card. The transition board
also supplies DC power to each transducer.
JXB
+ TEDS
Data 3
Data 4
Gnd
-TEDS 1
2
6
9
10
J12
JXA
+ TEDS
Data 1
Data 2
Gnd
-TEDS 1
2
6
9
10
Model 493.80
Quad Encoder
Transition Board
Mezzanine
Card
Model 494.49
Quad Encoder
Interface Card
Temposonics G
Transducers
I/O Carrier Board
J11
J3
2
6
1
5
8 - Data 1
+ Data 1
+ 5/15/24 V DC*
Gnd
-15 V DC*
Transducer
Channel 1
* DC Output voltages are determined by
jumper settings on the 493.80 board.
J4
2
6
1
5
8 - Data 2
+ Data 2
+ 5/15/24 V DC*
Gnd
-15 V DC*
Transducer
Channel 2
J5
2
6
1
5
8 - Data 3
+ Data 3
+ 5/15/24 V DC*
Gnd
-15 V DC*
Transducer
Channel 3
J6
2
6
1
5
8 - Data 4
+ Data 4
+ 5/15/24 V DC*
Gnd
-15 V DC*
Transducer
Channel 4