MTS FlexTest Models 200 - Manual (Page 235)

Model 494.33 Digital I/O Power Supply
MTS FlexTest® Models 40/60/100/200 Controller Hardware Digital I/O and Transition Boards 235
Power Connections for the Model 494.32 DI/O Breakout Box
To maintain EMC compliance, power cables must comply with the
following specifications.
Note The maximum cable length for all power cables is 6 m (20 ft).
For cable pin assignments, see “Power Connections Model 494.32 DI/O
Breakout Box” on page 236.
Output Pwr cable
Input Pwr cable
Model 494.32 DI/O
Breakout Box
P ARAMETER T O J1, 494.33 P OWER S UPPLY T O P29, 494.32 B REAKOUT B OX
Connector 4-contact, PT male connector 5-power contact, type D,
female EMI connector
Backshell Non-conductive with strain
relief EMI metallized plastic or
metal
Cable 16 AWG, 4-conductor with braided shield connected to the
backshell at the DI/O breakout box only.
P ARAMETER T O J1, 494.33 P OWER S UPPLY T O J3, 494.32 B REAKOUT B OX
Connector 9-contact, type D, male EMI
connector 15-contact, type D, female
EMI connector
Backshell EMI metallized plastic or metal
Cable 18 AWG, 4-conductor with braided shield connected to the
backshell at the DI/O breakout box only.