MTS FlexTest Models 200 - Manual (Page 327)

Aero Multibox Overview
MTS FlexTest® Models 40/60/100/200 Controller Hardware Aero Multibox Systems 327
Configure Each Model 493.25 / 494.26 DUC
For Hwi Editor versions 5.20 and above, use the Show Hwi Defaults feature to
make universal changes to the DUC default settings that you can apply to all the
DUCs in the controller.
1. Disable the analog input filter.
A. Starting at the 494.40 IO Carrier in VME Slot 4 expand the hardware
tree down to the level of “Analog Input x”.
B. In the Filter Type list, click Disabled.
Note MTS recommends that for Aero test applications, all filters on the
conditioner inputs of the Model 494.25 /494.26 DUCs are initially set to
“Disabled.”