MTS FlexTest Models 200 - Manual (Page 329)

Aero Multibox Overview
MTS FlexTest® Models 40/60/100/200 Controller Hardware Aero Multibox Systems 329
Save the Hwi File in the Correct Folder
The Hwi file must be saved in the folder that the CMT application created for the
controller box. These folders (named “Box 1”, “Box 2” ... “Box ‘n’”) are located
in the C:\MTS 793\Controllers directory.
1. Make sure the Hwi file is named: “793 Controller.hwi”.
2. Save the Hwi file in the folder with the controller’s name.
For example: C:\MTS 793\Controllers\Box 1.