MTS FlexTest Models 200 - Manual (Page 335)

Model 793 Multibox Systems
MTS FlexTest® Models 40/60/100/200 Controller Hardware Model 793 Multibox Systems 335
Task 3 Configure the Controllers
Use the CMT to Configure the Controller
Use the Controller Management Tool (CMT) application to rename each box and
set the Controller Type to define the Master and Dependent controllers. As you
rename each controller, the various folders in the Controllers directory will also
be renamed with the new controller name (Box 1, Box 2, ...).
1. If necessary, start the Controller Management Tool application.
2. Configure the Master controller.
The Master controller is the first box in the multibox configuration and
includes the HPU and HSM boards.
A. In the CMT window, select the first controller and click Options.
B. In the Controller Name text box, type Box 1.
C. In the Controller Type list, click Master.