MTS FlexTest Models 200 - Manual (Page 50)

MTS FlexTest® Models 40/60/100/200 Controller Hardware
FlexTest 40 Controller Configuration
FlexTest Controller Configurations 50
Model 494.04 Chassis Boards
The Model 494.04 Chassis includes three VME bus slots that contain the boards
listed in the following table.
Power
100-240 VAC
50-60 Hz, 4-2 A
DA Output
J24
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
J54 Dig In J49
Aux Pwr
J25 Hpu
Dig Out J55
Intlk J43
E-stop J29
J28 HSM
LAN 2 LAN 1
DEBUG
MOT
OROLA
10/100 BASE T 10/100 BASE T
SCSI
BUSY
PIB
BUSY
PCI MEZZANINE CARD PCI MEZZANINE CARD
Slot 4-5 - 494.41 System I/O
Slot 3 - 494.40 I/O Carrier
Slot 2 - 494.40 I/O Carrier
Slot 1 - Processor Board
Rear View of the Model 494.04 Chassis
S LOT B OARD N AME F UNCTION
Slot 1 Processor Board Provides PIDF processing and an interface between the
controller and the computer workstation.
Slots 2, 3 Model 494. 40 I/O Carrier Supports up to four mezzanine cards that can condition
transducers, drive servovalves, provide A-to-D inputs, and
interface to various digital transducers (such as encoders and
Temposonics transducers).
Slots 4, 5 System Board Provides digital I/O, E-Stop, and HSM/HPU control.
Compatible system boards include: the Model 494.41 Single-
Station System Board, the Model 494.42 Single-Station
System Board, and the Model 494.44 Two-Station System
Board.