MTS Series 647 Hydraulic Wedge Grips User Manual
Page 15
•
Turn hydraulic pressure on and off.
•
Select a control mode.
•
Manually adjust the actuator position.
•
Monitor a sensor signal.
Related products
See the following product information manuals for information about the related products.
•
The hydraulic controls for the Series 647 Hydraulic Grips can be located on the front panel of the load unit
or on an external unit (controls and a hydraulic power unit for the grips).
•
If hydraulic grip controls are located on the load unit, see your load unit product information manual.
•
If hydraulic grip controls are added to your load unit, see the 685.53 Hydraulic Grip Kit Product
Information manual (MTS part number 015-029-701).
•
If you have a dedicated hydraulic supply for the grips, see the Series 685 Hydraulic Grip Supply Product
Information manual (MTS part number 015-205-001).
•
If you are using an environmental chamber, see the Series 651 Environmental Chambers Product
Information manual (MTS part number 015-205-001).
Series 647 Hydraulic Wedge Grips Reference Manual 15
Introduction