MTS Eccentric Roller Grips - Manual (Page 6)

Introduction 6
How to Install a Grip in a Load Frame
1. Adjust the load frame to allow adequate room to install the grips.
2. Make sure the load frame mounting adapter, mounting pin, and
mounting dowel are clean. Remove any dust or particles that may
scratch the mating surfaces.
3. Install the grip mounting pin into the load frame mounting adapter.
4. Align the holes of the mounting pin and the load frame mounting
adapter and slide the mounting dowel into the hole.
5. Tighten the locking collar sufficiently to ensure there is no slack
during testing.
How to Install a Specimen with Roller Grips
Lever
Rollers
Closed
Specimen Opening
7.5 mm (0.3 in)
Lever
Rollers
Open