MTS Series 298 Hydraulic Service Manifold - Manual (Page 19)

Specifications
Series 298 Hydraulic Service Manifold Introduction 19
Specifications
General Specifications
PARAMETER SPECIFICATION
Operating pressure 21 MPa (3000 psi)
Maximum average full flow
*
(high
pressure mode)
* With dual 56 L/min (15 gpm) servovalves.
114 L/min (30 gpm)
Maximum peak flow 182 L/min. (48 gpm)
Pressure drop through manifold
(less filter) <0.7 MPa @ 114 L/min (<100 psi @ 30 gpm)
Filtration (optional) 3 micron (Beta3 = 75) or 10 micron (Beta7.4 = 75)
THE FOLLOWING ONLY APPLY TO THE MODEL 298.11
On/off solenoid valve 0 V DC= Off 24 V DC= On
THE FOLLOWING ONLY APPLY TO THE MODEL 298.12
Variable low pressure setting †
† Adjustable at the controller.
0.7 to 7 MPa (100 to 1000 psi)
Low-to-high, high-to-low ramp
time
†
2 to 5 seconds
Ramp time for rapid shutoff 550 ms
Maximum pressure transient 0.7 MPa (100 psi)
Maximum current to the electrical
pressure reducing valve 0.8 A