MTS Fatigue Analyzer User Manual
Page 59
![background image](/manuals/568038/59/background.png)
3. Click New Variable, type FatigueLoadPeak, and click OK.
4. Type the following values into the table.
FatigueLoadPeak
Description
Item
Failure Cycle
Category
FatigueLoadPeak
Identifier
Fatigue Load Peak
Display Name
0.000
Default Value
Force
Dimension
kN
Unit
No
String
Yes
Array
Description
5. Type the calculation in the Calculation panel or select variables and functions using the Insert buttons to
create the required calculation.
6. For Fatigue Load Peak, create the following calculation: Cycle[*].LoadPeak.
The cyclevarXArray = Cycle[*].Variable construction creates an array variable that includes the stored
values of the variable for each cycle from the test run. The result is assigned as the value of the calculated
variable, such as FatigueLoadPeak.
7. Click New Variable, type PeakValleyCycle, and click OK.
8. Type the following values into the table.
Peak Valley Cycle
Description
Item
Failure Cycle
Category
PeakValleyCycle
Identifier
Peak Valley Cycle
Display Name
0.000
Default Value
Count
Dimension
count
Unit
MTS TestSuite™ Fatigue Analyzer User Guide 59
6.0 Data Analysis