MTS Fracture Analyzer - Manual (Page 50)

5.3.9.0 Variable Table
The Variable table shows the current value of the selected analysis run variables. The table supports direct
value overrides that can be used for error correction or “what if” speculation.
Variable Table
You can override values for data not measured from a signal directly in the Value column. However, you
cannot override and recalculate calculations, unless you type a number in the Value column. In that case,
the calculation is handled as an assigned constant value.
Changes made in the Variable Table are processed only in the current analysis run.
5.3.10.0 Fixed-Column Boundary Table
The Fixed-Column Boundary table shows the current value of cycle variables with one cycle variable row for
each cycle. To see the array variable values, expand the variable row for a cycle.
50 MTS TestSuite™ Fracture Analyzer User Guide
5.0 Customizing the Main Window