Bosch SHE99CO5 - Manual (Page 20)

18
To reinstall the filter system:
1. Return the Micro Filter (select models) to its
installed position.
2. Return the Fine Filter to its installed position.
3. Place the Large Object Trap/Cylinder Filter
Assembly into its installed position in the
dishwasher floor.
4. Turn the ring handle clockwise 1/4 turn until
it is locked.
The arrow
on the ring
handle
and the
arrow on
the Fine
Filter
should
point to
each
other, as
shown by the circle in Figure 34.
5. Gently pull the ring handle to ensure that the
assembly is locked into place.
2. Remove the Micro Filter
as shown
in Figure 33
and flush
it clean
by holding
it under
running
water.
Figure 33
To Remove the Fine Filter and the Micro
Filter:
1. Lift the Fine Filter from the dishwasher floor
as shown
in Figure
32 and
flush it
clean by
holding it
under
running
water.
Figure 32
Care and Maintenance
(continued)
Figure 34
Micro
Filter
Fine
Filter
Colored Doors
Use only a soft cloth that is lightly dampened with
soapy water.
Stainless Steel Doors
Use a soft cloth with a nonabrasive cleaner
(preferably a liquid spray) made for cleaning
stainless steel. For best results, apply the
stainless steel cleaner to a cloth and wipe the
surface.
Clean the Door Gasket
Regularly clean the door gasket with a damp
cloth to remove food particles and other debris.
Cleaning the Exterior Door Panel
To avoid possible diswasher damage, do
not use harsh chemicals, abrasive
cleaners, scouring pads (metal or plastic),
or abrasive cloths/paper towels to clean
your dishwasher’s exterior door panel.
Your dishwasher’s exterior door panel can
be damaged by doing so.