Purenex Multipure Aquaversa - Manual (Page 17)

The Aquaversa models MP750sB and MP1200el are designed to mount to the
cabinet wall beneath the sink. These systems can also sit on the cabinet floor with
the use of an optional acrylic base. If you would like to order the Aquaversa acrylic
base, please contact Multipure Customer service at 800.622.9206, ext. 175.
1. Fasten the included mounting bracket to the wall, ensuring it is in an upright
position. The bracket is in an upright position when the two holes on the bracket
are at the top.
2. Attach the system to the bracket:
a. Tilt the system toward the wall.
b. slide the V-Band that runs along the
center circumference of the system up
and into the upper notch on the bracket.
c. straighten the system upright and let the
bottom of the V-Band settle into the lower
notch on the bracket.
3. To remove the system for servicing, reverse
the previous steps.
The MP750sB, MP750sI and MP1200el units can also be placed "upside-down" in the acrylic sleeve. A notch has been
cut out of the sleeve to accommodate the tubing. In this configuration, it may be necessary to relieve air which builds up
in the stainless steel housing every two months.
To relieve the built-up air:
1.
Turn on the faucet connected to drinking water system.
2. with the faucet in the "on" position, and water flowing through it, pick up the stainless
steel housing and turn it "right side-up", so that the ports and tubing are now on top.
You'll hear a "whooshing" sound come from the faucet as the trapped air escapes through
the open faucet. This should only take a few moments.
3. Once water continues to flow out of the faucet, return the housing back to its "upside-
down" position and turn off the faucet.
MP750sB
Multipure inline systems are ideal for refrigerators, water coolers, or restaurants where all water to
a cold water outlet or faucet is filtered. The inline Aquaversa (MP750sI) includes the housing, filter,
bracket, and screws. The inline models are appropriate for an inline installation and can be used
with your existing faucet. Multipure recommends that a professional plumber install the system for
inline use.
MP750sI
17
3.5: Placing the System Under the Sink
3.6: Installing the System for Inline Use
bracket
V-band
V-band
bracket