Multiquip MTR35W - Manual (Page 7)

MTR-35W— PARTS & OPERATION MANUAL — REV. #8 (06/26/01) — PAGE 7
RULES FOR SAFE OPERATION
■ NEVER Run engine without air filter. Severe engine may
occur.
■ Always service air cleaner frequently to prevent carburetor
malfunction.
■ Always be sure the operator is familiar with proper safety
precautions and operations techniques before using rammer.
■ Always store equipment properly when it is not being used.
Equipment should be stored in a clean, dry location out of the
reach of children.
■ NEVER use accessories or attachments, which are not
recommended by Multiquip for this equipment. Damage to
the equipment and/or injury to user may result.
■ NEVER Run engine without air cleaner. Severe engine
damage may occur.
■ Always read, understand, and follow procedures in Operator’s
Manual before attempting to operate equipment.
■ Always be sure the operator is familiar with proper safety
precautions and operations techniques before using pump.
■ Always store equipment properly when it is not being used.
Equipment should be stored in a clean, dry location out of the
reach of children.
■ Refer to the ROBIN Engine Owner's Manual for engine
technical questions or information recommended by Multiquip
for this equipment. Damage to the equipment and/or injury to
user may result.
Transporting
■ Always shutdown engine before transporting.
■ Tighten fuel tank cap securly and close fuel cock to prevent
fuel from spilling.
■ Drain fuel when transporting rammer over long distances or
bad roads.
■ When placing the rammer inside a truck-bed for transport,
always tie-down the rammer.
Emergencies
■ Always know the location of the nearest fire extinguisher
and first aid kit . Know the location of the nearest telephone.
Also know the phone numbers of the nearest ambulance ,
doctor and fire department . This information will be
invaluable in the case of an emergency.
Maintenance Safety
■ NEVER lubricate components or attempt service on a running
machine.
■ Always allow the machine a proper amount of time to cool
before servicing.
■ Keep the machinery in proper running condition.
■ Fix damage to the machine immediately and always replace
broken parts.
■ Dispose of hazardous waste properly. Examples of potentially
hazardous waste are used motor oil, fuel and fuel filters.
■ DO NOT use plastic containers to dispose of hazardous
waste.