Multiquip VR36HA - Manual (Page 56)

PAGE 56 — VR-36HA • VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. 6 (06/13/06)
VR-36HA — SERVICE INFORMATION
A. Drive Circuit Pressure
Park the machine on a solid flat surface and stop the engine. Set
the parking brake and block the front drum securely.
1. Install a 5000 PSI gauge to the forward pressure test quick
connect (#3).
2. Start the engine and run at full throttle.
3. Move the forward / reverse control lever to forward.
MAKE SURE DRUMS DO NOT SPIN.
4. Read the pressure (pressure will “spike” and then stabilize
to relief pressure).
5. Return the forward / reverse control lever to neutral and
stop the engine.
6. Install the pressure gauge to the reverse quick connection
(#2) and repeat the above procedures.
P/N 9692113HFF20