Belkin 802.11g - Manual (Page 9)

CONNECTING THE BRIDGE USING THE SETUP WIZARD
Attention: Your Bridge should work out-of-the-box. You only need to run the
Wizard for special settings such as encryption or head-to-head gaming play.
1. Insert the CD into your CD-ROM drive.
2. The “Wireless Setup Wizard” screen should automatically appear.
Note: If the Easy Setup Wizard does not start up automatically, select your CD-ROM
drive from “My Computer” and double-click on the file named “Setup” on the CD-ROM.
3. The Wizard will start. Click “Setup” to proceed.
4. Ensure the Bridge is connected to your network correctly and click “Next”.
6
P74397_F5D7330_man.qxd 10/28/03 10:08 AM Page 6