Multiquip MVH304DSB - Manual (Page 17)

MQ-MIKASA MVH-304DSB PLATE COMPACTOR — PARTS & OPERATION MANUAL — REV. #2 (11/16/05) — PAGE 17
Refer to Figures 3 and 4 for the location of controls and
components.
Adjusting Handle Height
The heigh of the handle is adjustable for your comfort .
1. Loosen the butterfly screw (Figure 8).
2. Turn the grip clockwise to raise the handle or counterclock-
wise to lower the handle.
3. When the handle is raised to the desired height, tighten the
butterfly screw.
MVH-304DSB — OPERATION
Figure 8. Handle Adjustment
2. Move the throttle lever to the START position by opening it
to about 20 degrees (Figure 10).
Figure 9. Open Fuel Cock
Figure 10. Throttle Lever (Start Position)
STARTING THE ENGINE