Multiquip MQ600TD80 - Manual (Page 57)

mq600Td80 TRaSH pUmp• opeRaTion and paRTS manUal — Rev. #11 (10/10/11) — page 57
iMpeller, cleanOut, and discharGe assy.
no. paRT no. paRT name qTy. RemaRKS
1 511223 90 DEGREE ELBOW 1
2 509078 HHCS 3/4 X 2 G5 8
3 492628 LOCK WASHER 3/4 8
4 511225 RETAINER 1
5 34496 GASKET 1
6 511220 PIPE NIPPLE 1
7 511217 MAIN HOUSING 1
8 511832 MACHINE BOLT 2
9 505988 DRAIN PLUG 1
10 511245 SLEEVE, SEAL (SHAFT) 1
11 34488 MECHANICAL SEAL ASSY. 1
12 511219 IMPELLER 1
13 34491 GASKET 1
14 511268 WEAR PLATE 1
15 511302 LOCK WASHER 2
16 508704 NUT 2
17 491210 DRAIN PLUG NPT1/4 1
18 511276 RETAINING BAR 1
19 511837 LOCK BOLT, FRONT COVER 1
20 506596 HEX HEAD BOLT M8 X 25 4
21 506597 LOCK WASHER M8 4
22 506308 HANDLE 2
23 511272 FRONT COVER 1
24 511221 6-INCH NPT NIPPLE 1
25 511838 SHIM, BASE 0.5 MM AR
26 511839 SHIM, BASE 1.0 MM AR
27* 511244 SHIM, KIT, IMPELLER AR
* - Adjust rear of impeller to adaptor cover 0.25 - 0.40 inch (0.64 - 1.02 mm)