Beko DVD COMBO - Manual (Page 15)

e) Language
There are many languages available for the
On Screen Displays (OSD).
In the features menu select
Language by Program down
button.
Press the OK button to select
the language list.
Press the »PR « /»PR «
or » « /» « buttons to
page through all the languages
and OK to select.
Normalization
• Whilst watching TV you may change the
picture While restore the original picture
setting press the BLUE
button on the
remote control.
You can also usethe “ “ button on your
remote control to select this function.
Note :Only use in TV mode.
b) Sleep Timer
The sleep timer automatically switches
the set to stand-by after the preset time
has elapsed.
You can select the time from 15 to 120
minutes with 15 minutes steps.
d) AVL:
TV transmitters have different sound levels.
AVL (automatic volume limiting) maintains
the same sound level as you switch from
program to program.
From the features menu you can select
AVL button by pressing
»PR « button.
To supply this press » « /» « button and
select ON for AVL.
14
FEATURES
EXIT
SLEEP TIMER
ON TIMER
AVL
LANGUAGE
OFF
OFF
ON
SLEEP TIMER
ON TIMER
AVL
LANGUAGE
OFF
OFF
ON
There are two ways to set the sleep timer;
1- Select the SLEEP TIMER in the
FEATURES menu. Select the desired time
by using Left or Right buttons.
2- You can also use the YELLOW
button on your remote control to select
this function. You can increase the switch
off time interval by pressing this button
repeatedly.
Notes:
The last 60 seconds of the desired switch
off time by counting from
59 down.
When this time interval has elapsed the
set will switch to STAND-BY.
To view the remaining sleep time, press
YELLOW button. To cancel the sleep time
select OFF in SLEEP TIMER.
c) On Timer
You can select the on time between 30
minutes to 12 hours by pressing
» « /» «
buttons and select the channel with
Numeric and AV buttons.
If TV is at Stand-by position, you can
switch it on at desired time and programme
by activating the ON TIMER feature.
To cancel the on time select off in ON
TIMER.