Billion Electric Company BiPAC VGP - Manual (Page 5)

VoIP/(802.11g) Broadband Firewall Router
The Rear Ports
3 1
8
7
4
3
2
The LAN 3 can be connected to the computer and console cable. You need a special
console kit in this package to connect the LAN cable of Port 3 when connecting to a PC’s
RS-232 port (9-pin serial port).
Port Meaning
1
Power Switch
Power ON/OFF switch
2
PWR
Connect the supplied power adapter to this jack.
3 RESET
After the device is powered on, press it to reset the
device or restore to factory default settings.
1-3 seconds: reset the device
6 seconds above, and power off, power on the device:
restore to factory default settings (this is used when you
can not login to the router, e.g. forgot the password)
4
WAN
WAN 10/100M Ethernet port (with auto crossover
support); connect xDSL/Cable modem here.
5
LAN
1X — 3X
(RJ-45 connector)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of
the three LAN ports when connecting to a PC or an
office/home network of 10Mbps or 100Mbps.
6
Phone
1X ─ 2X
(RJ-11 connector)
Connect RJ-11 cable to this port when connecting to an
analog phone set.
7
LINE
Connect RJ-11 cable to this port when connecting to the
telephone wall jack.
Antenna
Connect the detachable antenna to this port.
8
(Wireless Router only)