Hs62 cut-off saw — saw assembly instructions – Multiquip HS62 User Manual

Page 20

Advertising
background image

PAGE 20 — HS62 CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #5 (09/12/05)

HS62 CUT-OFF SAW — SAW ASSEMBLY INSTRUCTIONS

Reverse the

cutting arm

180 degrees as shown in the Figure

19, and re-tension the V-belt by turning the

belt tensioning

cam

O

. The V-belt should remain in tension.

Fully tighten the three nuts and washers

N

that lock the V-belt

into the proper tensioning position.

Figure 19. Reversing the Cutting Arm

Figure 20. Re-attaching Cover Guard

Re-attach the

cover guard

K

with the 2 cap screws

J

,

and reconnect the

guard adjustment knob

I

.

Advertising
See also other documents in the category Multiquip Equipment: