Ac ammeter gauge reading – Multiquip DCA20SPXU4F User Manual
Page 26
page 26 — dca20SpXU4F Servpro™ • operation and partS manUal — rev. #0 (07/16/14)
aC aMMeter GaUGe reaDiNG
HoW to read tHe ac ammeter gaUge
The AC ammeter gauge is controlled by the AC ammeter
change-over switch.
This switch is located on the control panel and
does not
effect the generator output. It is provided to help observe
how much power is being supplied, produced at the UVO
terminal lugs.
AC Ammeter Gauge Reading
Place the
AC Ammeter Change-Over Switch (Figure 13)
in the U position and observe the current reading (load
drain) on the U terminal as indicated on the
AC Ammeter
Gauge . This process can be repeated for terminal V.
Figure 13. Current Reading (Load Drain)
NOTICE
The
ammeter gauge will only show a reading when
the
Output Terminal Lugs are connected to a load
and is in use.