Northern Connectors Hummel M40 Circular Power Connectors - Manual (Page 14)

142
Crimp Tool Type Part Number
Crimp tool for contacts 16 mm 2 (AWG 6) ............................ 7.000.900.903
Application
The hand crimp tool 7.000.900.903 has been developed for optimal crimping of a large
variety of connectors and terminals by using different interchangeable crimping dies.
Operation
- Select crimp insert and install in tool
- Insert and align crimp contact in tool
- Compress tool until contact is held in place
- Insert conductor into contact
- Fully compress tool (tool will reopen automatically)
- Remove crimped conductor from tool
Crimp Tool for Power Connectors Size 1,5 (M 40)
Dimensions and specifications may be changed without prior notice
Set screw
Emergency release
Die retaining screws
Adjustment wheel
Stationary jaw with upper die
Movable jaw with lower die