Breville 800CPXL - Manual (Page 21)

POSSIBLE PROBLEM EASY SOLUTION
Machine will not work Switch not ‘On’
Arm not lowered
Cone or Dome not assembled properly
Motor stalls, the juicing cone will not spin Raise the Juicing Press Arm. Re-lower slowly for the first few seconds, then press down firmly.
Machine stops working during operation To ensure long motor life, the 800CPXL is fitted with thermal overload protection sensors.
If juicing large amounts of fruit in a short period of time, the protection may operate to ensure
that no damage is done to the motor. The sensors will automatically reset in about an hour when
the machine has fully cooled down.
TROUBLE SHOOTING GUIDE
20 TROUBLE SHOOTING GUIDE
800CPXL_IB_V1.qxd:800CP Book 19/8/09 9:24 AM Page 20