Northern Connectors Harting Industrial RJ45 Ethernet Connectors - Manual (Page 2)

RJ45
RJ Industrial
01
02
01. HARTING RJ INdusTRIAl® – RJ45 ETHERNET CoNNECToRs
The modular HARTING RJ Industrial® connector family is based
on the standard RJ45 pin profile and was developed especially for
use in rugged industrial environments.
This technology charts a new course in the wiring of appliances
with Ethernet interfaces, enabling the on-site configuration of
connectors for many industrial applications, no matter if the
product is a power connector or a communications connector.
For the fast wiring of all Ethernet networks, HARTING relies
consistently on the HARAX® IDC connection technology which has
proved its worth in many industrial applications.
Solid or flexible conductors up to a cross-section of AWG 22 are
terminated by IDC technology, without stripping or using any
special tool.
For all Gigabit Ethernet networks HARTING offers the 8-pole data
module with piercing connection technology and the new 8-pole
data module with HARAX® quick termination technology.
All data modules have the same dimensions. The replacement of the data module enables the conversion
of any 100 MBit Fast Ethernet network into a Gigabit Ethernet
network using HARTING RJ Industrial® connectors. This innovative
platform strategy also permits the use of the RJ45 data module
in combination with the PushPull, Han-Max® and Han® 3 A
connector families.
Based on this data module, HARTING has developed a
comprehensive connector family which covers all applications for
Fast Ethernet, 1/10 Gigabit Ethernet, PROFINET, Ethernet/IP and
other Ethernet profiles in the industrial environment.
Degree of protection IP 20 is available for the standard RJ45
connectors, either for configuration in the field, or as molded
system patch cable.
APPLIAnCe IntegRAtIon:
HARTING offers various RJ45 jacks for direct mounting on the
PCBs of appliances.