Northern Connectors Conec RJ45 Jack with Magnetic Filter User Manual
Rj45 modular jack with magnetic filter
Section 11
RJ45 Modular Jack with Magnetic Filter
The CONEC RJ45 Magnetic Filtered Modular Jack
has been especially developed for 10Base-T and
100Base-Tx LAN Ethernet applications.
The requirements for signal transfer over Ethernet
are specified in the IEEE 802.3u standard.
This series offers ideal protection against electromag-
netic interference and common mode interference in
Ethernet applications. Furthermore, the RJ45 MM jack
offers space saving advantages because the passive
components for IC adaptation are implemented.
The areas of application for this connector include
networking cards, hubs, motherboards, bridges,
routers, switches and point-to-point connections
for telecommunications and industry.
This series is available in single and multiple
ports (2, 4, 6, 8) designs with straight solder
pins for through hole mounting SMT versions
are also available.
RJ45 Modular Jack with Magnetic Filter